#Mac ip cam password#

Click on the 'System' option along the left hand side.

Click 'Apply' at the bottom of the page.

Under 'Lan Settings' enter the Static IP information provided from the network administrator into the appropriate fields.

Once into the cameras administrative settings click on 'Network' along the left side panel.

#Mac ip cam password#

the username is 'admin' and the password is 'admin' and click 'Login'.We recommend using the browser Opera for interacting with the PTZOptics camera for complete functionality but all browsers should allow you to make administrative changes to the camera.Once you have verified the static IP address of the camera we need to set a static IP address for your PC to communicate with the camera please follow these instructions: to assign your PC the following static IP address, as long as your camera is currently set to the default static IP of 192.168.100.88 IP Address: 192.168.100.89 Subnet Mask: 255.255.255.0 Router: 192.168.100.1 DNS Server: 8.8.8.8 and click 'Apply'.The camera comes with a default static IP address of 192.168.100.88 this can be verified by connecting your PTZOptics camera via USB (to a computer), HDMI or SDI to a display and entering the following sequence of keys on the remote * # 4.Connect your camera to your existing network that your PC is also connected to.Request a static IP (IP, Subnet mask, Router/Gateway, DNS Server) from your network administrator that will be assigned to the camera.

If this tool is not working for you, please follow the following steps to set an IP address for your PTZoptics camera on a mac. For instructions about setting up the camera using this tool please refer to the article HERE. PTZ optics has released a new IP address tool which should allow you to scan your network and set addresses for the cameras. Modified on: Wed, 15 Sep, 2021 at 1:43 PM

Solution home PTZOptics Streaming Setting up your static IP Address for a Mac.